Cursor goes to corner of screen and gets stuck
Cursor goes to corner of screen and gets stuck
Whenever I activate my controller the cursor goes to the far left or right of the screen and gets stuck there. I can't get it to move with the controller or the mouse. Is there something I can do to fix this and have it respond on screen as it should? Any help would be appreciated thanks.
-
- Posts: 4
- Joined: 30 Apr 2015, 08:30
Re: Cursor goes to corner of screen and gets stuck
I purchased this product and it doing the same thing - I have reloaded my controller driver and verified if xpadder is not load all winf=dos test of the controller work fine, Sine this a new purchase please help fix or process a refund.
I will try to delete and re install xpadder and see if that works.
I will try to delete and re install xpadder and see if that works.
-
- Posts: 4
- Joined: 30 Apr 2015, 08:30
Re: Cursor goes to corner of screen and gets stuck
Just tried a re install. If I don't add a controller layout it doesn't mess up. soon as I add any controller layout it screws up.
-
- Posts: 4
- Joined: 30 Apr 2015, 08:30
Re: Cursor goes to corner of screen and gets stuck
I created a new controller profile and it works fine. This video helped allot.
https://www.youtube.com/watch?v=jJUuZcO ... 4054190423
https://www.youtube.com/watch?v=jJUuZcO ... 4054190423
Re: Cursor goes to corner of screen and gets stuck
i have this exact same problem, however, that video just shows how to create a profile, which ive all ready done. and if you have this problem and run xpadder in admin it takes control of the mouse even when task manager is up as i found out. the only way around it is to manually remove the mouse entries from the profile. in my case they are..frmathiasen wrote:I created a new controller profile and it works fine. This video helped allot.
https://www.youtube.com/watch?v=jJUuZcO ... 4054190423
Code: Select all
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=32
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=32
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=32
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=32