I am trying to get a sequence to repeat as long as I hold down a button. The duration of the sequence is more than 2.5s so I can't use turbo. Is there another way to do this or is there a way to increase the turbo delay?
Thank you.
Repeating Sequences
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: Repeating Sequences
You could split up your Sequence with Cycle Stops into parts of 2.5 seconds (or lower) each and then use the Turbo to trigger these parts. Not really comfortable, but it would work.
Re: Repeating Sequences
Thanks for the quick response. The Cycle Stops work most of the time but sometimes I lag a bit and it throws off the Sequence. Is Xpadder capable of sending a KeyPress Down for X time and then sending KeyPress Up?
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: Repeating Sequences
No. not directly.
You could use many key presses divided by 0.00 Pauses. Most Games detect this as continuous hold, but with some games this doesn't work.
One key press is normally 0.10 seconds long, but you can alter the key press time by clicking on the tool symbol on the right of the profile name in the profile settings.
You could use many key presses divided by 0.00 Pauses. Most Games detect this as continuous hold, but with some games this doesn't work.
One key press is normally 0.10 seconds long, but you can alter the key press time by clicking on the tool symbol on the right of the profile name in the profile settings.