Hi,
I'm trying to use my g25 pedals (clutch and acclerator) as rudder for freespace2.
In xpadder, i set the two axes as Triggers, but here lies my problem :
When you don't touch the pedals the value is full and when you push on them the value get closer to 0.
As a result, as long as i don't push the pedals xpadders consider i push the button.
Is there anyway to tell xpadder that axes are reversed?
Reversed value?
-
- Xpadder Xpert
- Posts: 1118
- Joined: 27 Aug 2009, 03:35
- Location: Minnesota, USA
- Contact:
Re: Reversed value?
You'll need to manually change the axis to the pedals in the Controller settings. Click the name bar of the controller at the top left of the main Xpadder window to open the Controller settings then click the triggers tab. The axis where probably detected as Axis Y- and Slider 2-. Click the drop down menu and try Axis Y- Full and Slider 2- Full. You have to experiment a bit.
Re: Reversed value?
Your Xinput data also looks strange. Try disabling XInput in the main settings window.
-
- Posts: 2
- Joined: 15 Nov 2009, 19:04
Re: Reversed value?
Awesome!
Disabling xinput did the trick perfectly.
Thanks for your support!
I ll take more time to discover xpadder and then leave a comment on this software!
Disabling xinput did the trick perfectly.
Thanks for your support!
I ll take more time to discover xpadder and then leave a comment on this software!