Xpadder Forum

I am a step closer

The following are short messages I have received over the years via email or direct message: Gosh an I happy to find this after almost a decade! I've a legion Go and I think your software is going to be a life saver! 2023-12 Anon Thank you for this great app, really liking it so far! 2023-12 J OK, t...

The first copy of Xpadder sold was today 15 years ago!

Many, many copies of been sold here since even though not a single advert has been made to promote Xpadder!
You are here through recommendation only.

You can download Xpadder here

Thank you for supporting my little computer program

The current maximum buttons is 32

In the Xpadder main window, click the tab for the controller in the top-left of the screen.
This will show the raw data of the controller.
Use the plunger and see how the data alters. It's possible it's doing something non-standard.

You can use Sets to transfer to a different set of assignments when the right thumb stick is held down. In this new Set you can assign the Ping key to the left trigger. When you release the right thumb stick Xpadder will return to the default Set where melee is mapped to the left trigger. The Sets t...

I think I see now. The spring back when the plunger is pulled causes the plunger to return to centre but then appear as if pressed too. Have a look at Hold and Release Zones here: https://xpadder.com/forum4/viewtopic.php?f=7&t=3714 For example, if the plunger pull action triggers the key Z and the p...

You can set an assignment based on how long a button was held down or is being held down for.
viewtopic.php?f=7&t=3714
These are called Hold Zones and Release Zones

I'm still a bit unsure about the relationship between the plunger and the game.
Can you give a step by step example?
Does it work if you select a key press in the game and ignore Xpadder completely (for now)?

From Primal Fears' excellent tutorial : How does it work, if I have two or more controllers? If you have only one entry for the respective program, Xpadder will load the profile for the controller that is currently selected in the main window. If you want to load a profile for each controller, you h...

Xpadder does not use ALP files.
Instead you need to create your own controller layout.
This is very easy to do.

If you click the tab for the controller in the top-left of main Xpadder window you will see the raw data. Is the plunger movement being represented by a sliding bar (analog) or a button press (digital). If it is analog (similar to a stick or trigger) then you may need to increase its deadzone (via t...

Try adding a short pause slot after the assignment. This will turn the assignment from a key to be emulated while the plunger is held to simply outputting a sequence once the plunger is used. For example: Slot 1: X Slot 2: Pause 0.10s When the assignment is activated, Xpadder will simulate tapping X...

Xpadder is designed to read the controller then emulate key or mouse actions.
Emulating parts of the controller requires a different technical approach so it is not something Xpadder can do.

I am sorry. I mistyped my reply.

I meant to suggest emulating mouse wheel scrolling up and down for scrolling in windows.
Xpadder can simulate this even if your actual mouse does not have a mouse wheel.

Xpadder can only emulate key and mouse actions and cannot directly alter window elements.
I suspect emulating middle mouse button click then mouse move up or down will provide this.
Maybe Mouse Spring could be used in this situation?

Which image do you see here?
viewtopic.php?f=7&t=3708

Try removing the right stick in the controller layout and re-adding it.
Xpadder may be using the wrong axis for the stick

Changelogs are still not available as only minor changes were made. A full changelog will appear when major changes are made

Which controller are you using and which assignments are green? If they are the sticks then the deadzone for those sticks will need increasing. Prior to loading a profile (so they mouse is in your control fully), clcik the Settings wrench icon next to a stick and select Settings You will see the cur...

Which screen do you see here?

Lots of questions

Does Xpadder send key inputs to standard Windows Apps (such as Notepad) or your browser address bar?
How about simply moving the mouse around the Windows desktop?
Which game are you playing?
Do you have any other games with 32 and 64 versions that you can test with?

Xpadder.exe is the direct program and not a traditional installer. Once it runs it should immediately display a welcome screen and Xpadder should appear on the taskbar with its smiley controller logo. If this does not happen then it is possible that another security program is blocking Xpadder from ...

Xpadder is completely dependant on the driver software to provide the button information.
If the driver merges button data based on driver settings then Xpadder will only see this.
By design Xpadder does not include any direct controller access

1) Close Xpadder by right-clicking the icon by the clock. 2) Ensure there are no other controllers connected - only the Razer you mentioned 3) Start Xpadder If there is a spinning "searching" animation in the top-left of the Xpadder main window then click the animation and Windows will show the Wind...

Is this the only problem that Xpadder has. You mentioned Xpadder works ok. Is this in games and on the desktop generally?

To upload a screenshot use a site such as imgbb
This will give you a link that you can post here

Try this: 1) Create an assignment with the letter "x" mapped to any button 2) Set the button to Toggle (right-click the button in the main Xpadder window) "x" will now be emulated constantly after tapping the button. Tap the button again to deactivate the emulation. Now set a Turbo Time of 1 second ...

Try closing Xpadder fully (via its icon by the clock) then restart Xpadder as Admin (right click the Xpadder icon that you usually start it with and select "Run As Admin")

You need to add the Dpad to the controller layout then with the mouse click one of the buttons on screen representing one of the dpad directions to assign a key to it.

Hmm.
Does this mean that when you run Xpadder you see a spinning search animation?
If so, click the animation to view the list of controllers installed in Windows.

In the top-left of the Xpadder main window click the tab for the controller
This will display the raw data and provide access to the driver's test button
You will be able to see which parts of the controller are available to Xpadder

Xpadder reads controllers and simulates key and mouse actions.

Try adding the rumble function to a button and tapping the button to rumble
Does the rumble eventually stop with the button tapping also?

In Xpadder click the tab in the top-left of the main screen. This will either be a searching animation if not controllers found (or the first controller found) This will open the Windows Controller Control Panel where you will see all controllers available for Windows (and Xpadder to use) If the Ste...

Have a look at Hold Zone and Release Zone here: https://xpadder.com/forum4/viewtopic.php?f=7&t=3714 This example will tap X once when you squeeze the trigger then tap Y when you fully release the trigger: HoldZone (0.01s) X Pause(0.10s) ReleaseZone (0.01s) Y The Pause(0.10s) after the X is used to t...

Have a look at Hold Zone and Release Zone here: https://xpadder.com/forum4/viewtopic.php?f=7&t=3714 This example will tap X once when you squeeze the trigger then tap Y when you fully release the trigger: HoldZone (0.01s) X Pause(0.10s) ReleaseZone (0.01s) Y The Pause(0.10s) after the X is used to t...

Adding non-standard controllers in Xpadder can have issues and involves trial and error. It is best to initially not assign any key or mouse actions to a button on screen. The buttons in the main Xpadder will turn turn green when Xpadder sees them as down so try to create a controller profile that t...

In the Advanced Assignments window for a button you can add: Tap Time (light blue) 0.10s A Tap Time (light blue) 0.10s A Left arrow Tap Time (light blue) 0.10s A This will hold the A button down for 0.30s with the left arrow held down for the middle 0.10s only You will also need to use the Turbo opt...

Xpadder can read any controller that is installed in Windows as a Game Controller
A list of installed Game Controllers can be found in the Windows Control Panel

Xpadder can only simulate key and mouse presses. It cannot simulate other button presses directly.
Can you give an example of the sequence you would like to be output using only letters?

Xpadder reads the incoming data from the controller directly.
You can see that data by clicking the controller's tab in top-left of the main Xpadder window
You will be able to see if the data is being changed by the regedit or not

1)Some drivers don't provide rumble that Xpadder can use
2) Only key and mouse actions can be simulated
3) Driver settings decide which parts of the controller can be programmed

1) Alcuni driver non forniscono rumble che Xpadder può utilizzare (Some drivers don't provide rumble that Xpadder can use) 2) È possibile simulare solo le azioni dei tasti e del mouse (Only key and mouse actions can be simulated) 3) Le impostazioni del driver decidono quali parti del controller poss...

The following are short messages I have received over the years via email or direct message: It must be over ten years now that every time I get a new computer I have to download xpadder again and every time I return to the site I'm prepared to pay again but never have to. Fantastic software I would...

I have no plans to add controller specific access
Xpadder is designed to be a stand-alone one-file application only (no drivers installed by it) and so it is dependant on the external driver

Xpadder is dependant on the driver to provide access to the buttons. Some Home buttons are used directly by the operating system so the driver does not give games and Xpadder access to that button. Sometimes driver settings or 3rd party drivers exist that enable the home button to be accessed just l...

Alternatively, following this tip from Mobeeuz: Don't save them as BMP or JPG's - Save them as PNG files. You will want to use a proper image editing program that uses layers, such as the GiMP when creating them. Xpadder won't load them if you use the open button, but copying the image into memory a...

First of all you need a paint app (on your computer or online) The bottom line: Xpadder Controller Images are 512x256 BMP files Xpadder can only open uncompressed 256/16m colour BMPs but you CAN copy and paste the contents of any format directly into the Controller Settings window (using the Image o...

Sehen Sie eine sich drehende Suchanimation? Wenn ja, sind die Controller-Treiber nicht installiert. Wenn nein, können Sie in den Einstellungen Ihr eigenes Controller-Layout zeichnen

Xpadder is still alive

If the tab in the top-left of Xpadder turns red this means that the controller has been disconnected (or Windows has lost contact with it somehow)
When it next happens try right-clicking the Xpadder icon by the clock and close Xpadder
Now restart Xpadder. Is the controller available again?

The Xpadder window was always designed to be the same size to cater for the fixed size of controller images and various elements. It made testing much easier Over time, as the resolutions of screens has increased but the default controller image size is still 512x256 The physical size of screens has...

As Xpadder has not been recently updated, the issue may be with an update to GW2
I suggest visiting the GW2 forum to see if anyone else is having recent issues using Xpadder or similar applications with GW2

Are other games working ok?

Thanks for the fix Rick

1) Could someone please tell me what Access violation at address 004AC9F1 These errors are usually an issue with drivers and another device connected to Windows. Are you able to reproduce this error or is it random? 2) When I am in the Rocketlauncher UI and I click on the edit controller profile, Xp...

I will look into it

Xpadder is dependant on the driver. For now search the internet for PS5 Windows driver and use Xpadder only when the driver is installed

Intente deshabilitar XInput en la ventana de configuración de Xpadder. Cierra Xpadder a través del icono junto al reloj. Reinicie Xpadder. ¿Siguen ocurriendo los problemas? Try disabling XInput in the Xpadder settings window. Close Xpadder via the icon by the clock. Restart Xpadder. Does the problem...

@JGKings06, are you also using Xbox One controllers? Also, which version of Windows and does disabling XInput help?

¿Qué versión de los controladores oficiales de Xbox estás usando (One, 360, Wireless, USB)? Which version of official Xbox controllers are you using (One, 360, Wireless, USB)? Google Translate: xpadder does not work correctly when using 2 xbox controllers or an xbox controller and another generic di...

Sie müssen die Toggle-Option im Zuweisungsfenster verwenden You must use the toggle option in the assignment window Google Translate: I'm in need of some help In the euro truck there is a key that zooms in on the cabin camera on ETS2, I once made a command sequence that when I pressed the button the...

To remove the virtual controller tab you will need to restart Xpadder.
Right-click the Xpadder icon by the clock to completely close Xpadder
Start Xpadder again and the tabs will refresh

In Xpadder, click the Settings wrench icon next to the stick that is showing green. You will see the deadzone for the stick and the current stick position. Some sticks require a larger deadzone than the default one so increase the deadzone until the buttons do not show green The deadzone is only use...

Is there another app or driver setting that is already reading the controller and outputtinb those keys? Try closing Xpadder completely (by right-clicking the Xpadder icon by the clock) Now, in Word (with some random letters aready in the document), press LB on the controller and press A on the keyb...

When the button turns green this indicates that Xpadder is simulating the assignment on that button. The raw data numbers also show that the buttons are working as expected This is a strange problem Some ideas: - Try turning XInput off in the Xpadder settings (this will use DirectInput only) - Resta...

The falling away animation indicates that the controller has been disconnected. The tab in the top-left of the Xpadder main window will also turn red to indicate loss of connection. When the controller is reconnected then the image and rise up again. The tab in the top-left will turn white. If no co...

You can download Xpadder here

When starting Xpadder there should be 2 tabs in the top left of the main window
There will be 1 tab for each controller that is installed in Windows.
Xpadder is only an app so a driver is required before Windows and Xpadder can see the controller

I understand - I hope to change
While the keyboard image is QWERTY, AZERTY keyboards will still work.
If you select A in Xpadder, the A key on the any layout of keyboard will work.

Xpadder can only respond to DirectInput or XInput data. If you click the controller tab in the top left of the main Xpadder window you will see the raw data that the Windows driver is providing. Xpadder can only respond to this information and will ignore key inputs

Xpadder is completely dependant on the driver to provide data.
The controller or driver settings need to be adjusted if you want Xpadder to read the paddles as different buttons.

Run Xpadder and perform all the installation prompts. Now close Xpadder via the icon by the clock. This will save the settings file to disk. Now start Xpadder again and it should carry on as before. Also, check that Xpadder is in a writeable location - the desktop or documents folder is usually safe...

Some tests: 1) Once Xpadder has finally appeared close Xpadder fully via the icon by the clock. Now start Xpadder again. Does it appear instantly or still take an age to load? 2) Try fully closing Xpadder (via the icon by the clock) if it is running. Now disconnect your controller and start Xpadder....

If you click on the searching animation in the top-left corner of the Xpadder main window you will see the Windows Games Controllers control panel.
All installed controllers will be listed there. If your controller is not listed that a driver will need installing for it.

This is only possible if button 1 switches to another set and button 2 has the desired assignment in that set.
It's not exactly the same as you require but it may work.

This would indeed be a useful function.
It is on my list.

For this controller it may be easier to manually select the axis to use instead of using the detection system. To do this, return to the main Xpadder window and click the controller tab in the top-left of the window. This will bring up the raw data. Move the various parts of the controller and note ...

Does Notepad or Word respond to the key assignments you have set in Xpadder?

If the Notepad test works then Xpadder is configured correctly. If possible, try Xpadder in other games. Some online games block simulated inputs to prevent cheating. If this is the case, there is usually a discussion on the official game forum about Xpadder not working. Any workarounds or informati...

Te envié un correo electrónico

Try using your controller with Xpadder in Word or Notepad to test inputs.

Google Translate:
Essayez d'utiliser votre contrôleur avec Xpadder dans Word ou Notepad pour tester les entrées

Xpadder depende completamente del controlador para proporcionar los datos del controlador.
¿El controlador funciona bien en Xpadder?

By design Xpadder is completely dependent on the driver to provide controller data. There are no plans to add specific controllers.
The majority of controllers work with Xpadder without any problems.

This function was called Cycle Link and was part of earlier versions of Xpadder. I had to remove it as it caused several issues with advanced assignments. I used to use it when selecting weapons in some games but found that there is usually a next weapon and previous weapon key that performs the fun...

If you create an advanced assignment (link opens new tab) on the left thumbstick button containing 3 slots (a Left Shift Key, a pause of 0.10s then another Left Shift Key) this will double tap the left shift key when you click the left thumbstick.

Xpadder detects game controllers only and the driver for the device needs to identify itself as a game controller.
You can find installed game controllers by clicking the searching animation in Xpadder although if it is searching then the list will be empty.

The image is optional and for now you can draw your own using the built-in tools in Xpadder. When creating profiles, especially with new controllers, I first practice the keyboard assignments of the profile in Notepad or Word. Once the correct letters are being produced I then start the game and try...

Just checked and its ok now. Maybe OneDrive had an error?

Xpadder is still under development although I can no longer do so to the level I used to. Any new features will be clearly detailed when released

Please send me a message using the contact link on the right

I have tried a number of methods but the results are not good. Unfortunately, with the current framework it is not possible to fix this issue.

This is not possible directly. In your example (I press Select+X and I get Keypad3) you would need to create a Set Selector (while held) for the Select button and inside assign Keypad3 to the X button. You would then need to create a Set Selector (while held) for the X button and inside assign Keypa...

Thanks for the update

Some things to try:
In Xpadder Settings > Options: Uncheck the box to process non-selected controllers
In Xpadder Settings > Controller: Select the wheel and click the Hide button

Thanks. I will see what I can do...

Yes. The workaround is not ideal. I have an idea... Please could you send me a screenshot (by uploading it to imgbb or similar site and posting the link here) of the controller properties page of one of the Xbox One controllers. It's the window with the raw data. If you do this with only one control...

If you click that "searching" animation you will open the Windows Game Controllers window. Is the controller list there?

This is due to the new version still gaining reputation. It happens each time I release a new version. False positives slowly disappear over time.

Thanks again for making the videos. Very useful. It appears that test 2 confirms my theory. Due to the bug, using 2 or more Xbox One controllers on Windows 10 overloads the detection system and requires bringing the window into focus. The quickest workaround is to connect the controllers one at a ti...

By design Xpadder is completely dependant on the driver software to provide the button state.
Unfortunately the share button data is not provided and cannot be accessed in the usual way.
This may change with future drivers or if an unofficial custom driver is released.

You first need to close Xpadder fully by right-clicking the Xpadder icon by the clock.
Now check Task Manager to ensure no versions of Xpadder are running (including ones with a prefix in the name)
Now from Explorer navigate to the folder containing Xpadder and run Xpadder directly.

I'm not sure what you mean by your mouse is working but not the mousepad.
Xpadder simulates mouse movements and button actions so should replace inputs from both the real mouse and the mousepad.
Can you give a simple example?

Thank you for taking the time research the problem and to create a video. This is very useful. I think I have found the problem: DirectInput in Windows 10 does not allow XBox One controllers to be accessed in the background When 2 or more Xbox One controllers are connected in Windows 10, the GUI nee...

Are you able to create a simple profile to move the mouse pointer around the Windows desktop and type letters into Word or any text area?

You can find handy tutorials detailing the steps here

Thanks for the feedback. A quick update. I have found the issue but it is proving difficult to fix. It involves the timing loop. Xpadder loops 100 times a second so each loop should be 10ms (0.01s). For each loop, after processing, the rest is filled with idle time. On Windows 10 the idle time is no...

If you click the tab in the top-left corner of the main Xpadder window you will see the data being provided by the driver: http://xpadder.com/forum4/images/help/main_window-controller_properties.jpg You will be able to see which parts of the controller are being sent as which buttons. As the data he...

This is a tricky one. There are a number of technical reasons why this slowdown may be occurring. If you run Xpadder with a blank profile, select any button in the controller layout, click to add an assignment, click Advanced, tick the Turbo box and set the time to 1.00s - the Robocop animation shou...

I have received another message about timing issues in Windows 10. They had a clever of assigning a key to a button and setting toggle and a turbo of 1s. In a 20 second Notepad test in Windows 7 this output 21 keys whereas Windows 10 only output 13 keys It would be useful if you could perform the sa...

Try closing Xpadder completely (via the tray icon) Now right-click Xpadder.exe and select Properties and select the Compatibility tab Now choose your previous version of Windows If that doesn't help do you notice input delay via Xpadder in the fighting games when moving or performing single button a...

Try using a blank profile in Xpadder so no keys or mouse actions are being simulated. If this stops the problem then it is due to a shortcut being simulated. There are a number of keyboard shortcut keys for various Windows settings. If you search online you should be able to find the keyboard shortc...

If you close Xpadder fully (right-click the Xpadder icon by the clock) see if Windows itself is reading the controller and creating this behaviour

If you disable XInput in the Xpadder settings, DirectInput will be used to access the controller.
Is the share button usable in Xpadder now?

If you head to https://xpadder.com and enter your new email address you will receive a new "key" link.
There is a secure message system on your new key page where you can provide your original details and I can update your account.

My answer to your previous post also applies to this one

Some apps are designed to run at an elevated level and will not respond to simulated key and mouse inputs. This is usually for security and to prevent malware from creating havoc. Sometimes a game runs at an elevated level for various reasons and will also ignore simulated key and mouse inputs. I su...

Thank you.
Please can you upload the image to imgur or imgbb so that it displays correctly.

Some things to investigate :shifty: 1) When this next happens, try disconnecting your controller then re-connecting it. Does that bring it back to Xpadder? 2) Which programs does this happen with? Does it always happen with these programs and if so is it from the moment those programs start? 3) When...

Windows version?
Error message?

Google Translate: The program does not start. Tried several times. need help.

Google Translate: En la ventana principal, haga clic en la pestaña en la parte superior izquierda. ¿Todos los botones cambian los números? (In the main window, click on the tab in the upper left. Do all the buttons change the numbers?) https://xpadder.com/forum4/images/help/main_window-controller_p...

If this issue only occurs with LaunchBox their forum may be the best place for a solution. I suggest searching "launchbox xpadder" It appears that more LB users use Xpadder than Xpadder users use LB so the answer will probably be there instead. One final idea. If LB allows for a command to be run wh...

Xpadder AutoProfile uses the currently active window to determine which profile to automatically open.
If you keep Xpadder (with the last emulator profile used still loaded) and close then reopen Launchbox does Xpadder open the Launchbox profile correctly?

You can use the Toggle function to do this.
In the main Xpadder window right-click the button with the assignment and select Toggle.
The assignment will emulate when the button is released. Press the button again to stop emulation

This has been reported by many users and affects other similar input emulation software.

I seem to have missed this post! I have received a message from someone else with the same issue: "Right shift and left shift are not split. If I assign shift L, it always answers shift R. In pinball games, with shift L and shift R, it always response shift R" My reply to them was: "Xpadder uses dif...

Fantastique. Merci pour le partage.

I am not able to test in MS myself. It appears that the problem is the link between emulated input data and MS reading that data (which it can do even if the window is not selected). It is possible that any emulated input data from any app with introduce the same issue. It would be useful if there a...

Does this handle issue occur with Notepad or other games?

If you click the controller's tab in the top left of the main Xpadder window you will see the raw data for your controller: https://xpadder.com/forum4/images/help/main_window-controller_properties.jpg The working stick will be Axis X and Y (and possibly LThumbX and LThumbY) The second stick will be ...

A few things to test:

1) Does the handle count increase at a steady rate?
2) Does the issue occur if Xpadder is completely closed (via the Xpadder icon by the clock) and not used at all?
3) Does the handle increase cease if you close Xpadder (as above)?

You can see the raw data that the driver is providing for each controller by clicking on the controller's tab in the top left of the main Xpadder window: https://xpadder.com/forum4/images/help/main_window-controller_layout_finished_no_profile.jpg https://xpadder.com/forum4/images/help/main_window-co...

The Mouse Spring mode is fixed at 100% of the screen. It may be possible to add Distance Zones to limit how far the stick can move and be reacted to but this was never intended to be used with Mouse Spring and the results are far from perfect You can Copy the Profile below and Paste it into Xpadder ...

Sometimes Windows, browsers or security software block Xpadder from being downloaded or being run. The block is probably not because of Xpadder itself but because it is a program that has been downloaded from the internet. There is a potential for any downloaded program to cause problems so by defau...

When running Xpadder and an instance of Xpadder is already running two things can happen: a) If Xpadder is already running from the same location you are re-running it from, the main window will either appear (if it is currently minimized) or minimize (if it is currently on screen) b) If Xpadder is ...

This is a common problem and easy to fix.

I have posted a new topic about it here

Xpadder saves its settings to a file called Xpadder.ini This file is saved in the same folder where the Xpadder program file is located The settings file is only created or updated when the Xpadder program closes If Xpadder does not close cleanly then the settings file is not created or updated This...

Click "Login" in the top-right of this page Click "I forgot my password" If this option does not work you can contact me and I will reset it for you. You can contact me by visiting your personal key page (the one where you download Xpadder from) and use the Messaging option If you no longer have the...

Forum registration is only available if you have purchased Xpadder If you haven't already, you can buy Xpadder here If you have already bought Xpadder you can join the forum by visiting your personal key page (the one where you download Xpadder from) If you no longer have the link to it you can rece...

The BMP must be 24bit or 256 color uncompressed. This gives a filesize of 549KB or 184KB To return to the default UI: 1) Close Xpadder fully by right-clicking the Xpadder icon by the clock 2) Open the Xpadder.ini settings file in Notepad 3) Remove the [Theme] section (it contains 10 lines, including...

Added Primal Fear's collection link to "Where to Download Other Controller Images" section

The errors "The parameter is incorrect" and "Windows cannot access the specified device, path, or file" are general Windows error messages. At this stage Xpadder has usually not even started. Thank you for reporting that disabling Panda Dome fixed it - this is very useful to know. A quick search sho...

Over the years, SuperGeri70 has provided many fantastic theme images.
Unfortunately, most of the embedded image links to earlier ones have now expired.
The direct link to the entire collection is here:
SuperGeri70's Theme Image Collection (link opens new tab)

For my emulators I have assigned DpadDown with the SaveState key, DpadUp with the LoadState key and DpadRight with the SelectNextStateSlot key At the start of a level I tap DpadRight until state save slot 1 is selected I then tap DpadDown to save a state at the start of the level I then tap DpadRigh...

I've just finished Robotron 64 (N64)! Very fun https://www.youtube.com/watch?v=eq7mNSkzgfQ Like SmashTV, you use one set of controls to move and another to shoot in that direction. On the original N64 controller, you moved with the stick and shot using the C buttons. On an emulator (I use PJ64) you ...

Project update 2020-06-17 Xpadder still selling well I'm busy coding the future

Xpadder still selling well
I'm busy coding the future

Added images for the top 4 controllers based on Controller Usage Survey 2020

Right-click the image, Copy and use the Paste button in Xpadder Controller Settings window: https://i.ibb.co/kqz0cSP/Microsoft-Xbox-One.png https://i.ibb.co/CWxVGgs/Sony-Play-Station-4.png https://i.ibb.co/DGy9CQr/Microsoft-Xbox-360.png https://i.ibb.co/CPPL32t/Sony-Play-Station-3.png The image you...

If you've used an old version of Xpadder before then this is a list of everything that has been improved, added or fixed. Last updated for version 2017.05.01: - Added Windows 10 support - Added extended information for EnumDevices errors - Added Windows 8 and Windows Server 8 support - Added TapTime...

Xpadder is still selling well.
The new key and contact system is working great.
The new forum and help system (that I am still working on and is taking most of my time) will be linked to the new key system.

Thanks to Danielle B for this solution:

If your controller no longer works after upgrading to Windows 10 you may need to update your drivers to the latest version that supports Windows 10.

Windows 10 is stricter with driver installation and so older drivers may not work.

You can download Xpadder here

The following functions are currently disabled and will be for a few hours at least:

- New account registrations
- Password reminders

All other functions are working as normal

This topic will be updated or removed once I have finished the site update

Thank you. I have updated the first post in this topic with some more lines.

Thank you superbigd

I have updated the list here with new lines for translation.

"Default save and open location" is displayed in the one of the prompts when Xpadder is first run (no Xpadder.ini file present in the .exe folder)

The following lines need translating for the next version of Xpadder. If you can provide a translation for one or more of these lines then please reply with the translation(s) - thank you. Your name will be added to the credits of all future versions that use your translations. Thank you. Example: Y...

Thank you takaev. These will be included in the next site update

Thank you takaev. These translations will be part of the next update.

Is your controller synced to the wireless receiver?

Does your controller appear in the Game Controllers Control Panel?
Also, check that the top-left player 1 led is lit on the controller.

newreality

Mylene

Mobeeuz

Jonathan

Skarn

Eugene Golushkov

Primal Fear

Marfal

Eclenaeu

primal fear

Primal Fear

Steve and Jonathan

Adrian and Jonathan

Fabio L.

smithonian

Mobeeuz

primal fear

Zikkurat

Vova Gendel

Mobeeuz

Sirenesse

MaikDragon

Andreas

David Tenório

Jonathan Veersma

Wolf Fhang

ospigor

Primal Fear

tresh

Primal Fear

Mobeeuz

地表零度

Primal Fear

WaxX

Mitsuagi

Glg11

:rafael.adamy

primal fear

Diablo

primal fear

Search found 972 matches