Logitec F710 left stick problems
-
- Posts: 1
- Joined: 14 Oct 2012, 02:47
Logitec F710 left stick problems
Ive got a Logitec F710 wireless controller that will not recognize the left stick function and comes up as "this is not an analog stick add as d pad" . Thinking its a controller fault I have got a replacement one but have the same issues .Any advise would be appreciated. P.S have run a test on the controller and all OK
Re: Logitec F710 left stick problems
weird. Ok, Lets see if we can identify what's happening here.
Open the Controller Properties window and try to identify the names of the axis. Twist the left analog stick around. If you don't see green bars sliding around, or all you see is the "POV" directions firing then it might be a problem with Logitech drivers.
If you DO see two axis responding to the left stick.
1.Move the left and right and note the axis name. repeat for up and down.
2. Open the Controller Settings window and Enable Stick 1. (cancel the small wizard box that apears)
3. Manually select the axis for the left-right and the up-down directions.
Open the Controller Properties window and try to identify the names of the axis. Twist the left analog stick around. If you don't see green bars sliding around, or all you see is the "POV" directions firing then it might be a problem with Logitech drivers.
If you DO see two axis responding to the left stick.
1.Move the left and right and note the axis name. repeat for up and down.
2. Open the Controller Settings window and Enable Stick 1. (cancel the small wizard box that apears)
3. Manually select the axis for the left-right and the up-down directions.
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact: