Recently I upgraded my HDD so re-installed windows and the game. DS4tool and xpadder along with the related files were on another drive so I assumed everything would work as it had been however that is not the case. The sprint toggle no longer seems to work.
These are the files I was using that used to work.
Code: Select all
;----------------------
; Xpadder Profile File
;----------------------
Version=2010.06.03
[Profile Settings]
KeyTapTime=1
[Set Settings]
Set1StickDeadZones=30,30
Set1Stick1Mode=Vertical
Set2StickDeadZones=30,30
Set2Stick1Mode=Vertical
Set3StickDeadZones=30,30
Set4StickDeadZones=30,30
Set5StickDeadZones=30,30
Set6StickDeadZones=30,30
Set7StickDeadZones=30,30
Set8StickDeadZones=30,30
[Assignments]
Set1Button5Name=L1
Set1Button5SetSelect=1
Set1Button6Name=R1
Set1Button6SetSelect=1
Set1Button9Name=L3
Set1Button9Slots=Left Shift
Set1Button9Toggle=1
Set1Stick1UpName=Up Wide
Set1Stick1UpSlots=RELEASE ZONE 0.10s
Set1Stick1UpSetSelect=1
Set1Stick1RightName=Right
Set1Stick1DownName=Down Wide
Set1Stick1DownSetSelect=1
Set1Stick1LeftName=Left
Set2Button5SetSelect=0
Set2Button6SetSelect=0
Set2Button9Slots=Left Shift
Set2Button9Toggle=1
Set2Stick1UpSetSelect=0
Set2Stick1DownSetSelect=0
Code: Select all
;------------------------
; Xpadder Controller File
;------------------------
Version=2010.06.03
[Button Locations]
Button5Location=68,51
Button6Location=397,53
Button7Location=206,182
Button9Location=36,190
Stick1UpLocation=36,158
Stick1RightLocation=68,190
Stick1DownLocation=36,222
Stick1LeftLocation=4,190
[Access]
Stick1XAccess=Axis X
Stick1YAccess=Axis Y
[Names]
Button5Name=Button 5
Button6Name=Button 6
Button7Name=Button 7
Button9Name=Button 9
Stick1Name=Stick 1
StickUpName=Up
StickRightName=Right
StickDownName=Down
StickLeftName=Left
[Image]
Can anyone shed any light on why this profile no longer seems to work. Or how I can get sprint in BF3 to work the same as the console version.