Just been playing with Xpadder for an hour or so and I am stumped trying to achieve what I want. I am not new to joystick programming software, just new to Xpadder.
All I want to do is to have a button programmed to do the following:
When you press the button a sequence is initiated where the A key is held down for 1 second, and while the A key is held down during that 1 second press and release the B key at the 0.5 second mark, and after the 1 second release the A key.
Is that possible using Xpadder? Any help would be greatly appreciated.
Thanks in advance.
Help with sequence/timing
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: Help with sequence/timing
You can do that in the Advanced Assignment window.
You need to add following to the slotbar:
Tap Time 0.50s; A; Tap Time 0.10s; A; B; Tap Time 0.40s; A
You need to add following to the slotbar:
Tap Time 0.50s; A; Tap Time 0.10s; A; B; Tap Time 0.40s; A
Re: Help with sequence/timing
Thanks very much.
I tried that and it does A, then AB, which means it must have released the first A to do the AB.
Is there no way to just tell Xpadder to hold down the A key until you tell it to release it?
Thanks.
I tried that and it does A, then AB, which means it must have released the first A to do the AB.
Is there no way to just tell Xpadder to hold down the A key until you tell it to release it?
Thanks.
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: Help with sequence/timing
A is definitely held without interruption.
Did you test it in a text editor? If yes, simply test it by holding a keyboard letter key on your keyboard. You will see that it also starts typing multiple letters after some time, although you never released the key.
Did you test it in a text editor? If yes, simply test it by holding a keyboard letter key on your keyboard. You will see that it also starts typing multiple letters after some time, although you never released the key.
Re: Help with sequence/timing
Primal, I was able to test this in game and you are of course correct it works just as intended. Thanks so much for your help on this, seems like a simple sequence but I was scratching my head.