Tap & Hold doesn't work properly

Post Reply
kloos1903
Posts: 1
Joined: 12 Nov 2013, 16:26

Tap & Hold doesn't work properly

Post by kloos1903 »

Ok, so I've set op my xpadder in the following way

[Release: 0.01s] [h] [Release: 0.20s] [Hold: 0.21s] [g]

A fairly simple tap and hold, I've done it before without a problem.
So what I expect to happen is this:
Tap: 'h'
Hold: 'gggggggggggggggggggggggggggggggggggggggggg...'

What actually happens:
Tap: 'h' (no problem there)
Hold: 'g'
On release after holding and getting a 'g' first, I get another 'h'

So it won't hold the 'g' down (and I'm not using a pause) and seems to ignore the second release.

Is this a bug, or am I doing something painfully obvious wrong?

Post Reply

Return to “How do I do this combo/sequence?”