Hi !
I've set up all the assignments the way I wanted to play with Minecraft with my Xbox 360 wireless. Everything's just fine but there's one thing that bother me : I'm used to play with the Y axe inverted. This is OK while I'm playing except when I open the inventory where having the Y axe inverted makes it pretty difficult to do anything. So what I'd like is to be able is to switch from "invert Y axe" to "normal axes", for example using the analog stick click. Is this possible or not ? Thanks in advance for your help.
Regards,
Frank.
Toggle from "mouse invert Y" to "mouse normal"
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: Toggle from "mouse invert Y" to "mouse normal"
You can do that by using the Set Selector. Right click on the button you want to use->Set Selector-> select destination Set->select method. Two-way means one button press to this Set, another button press back to source Set. I guess the other ways should be clear (now).
Note that you have to do every change in the mouse setting you did before again. All assignment that are needed in this different Set have to be recreated too.
Note that you have to do every change in the mouse setting you did before again. All assignment that are needed in this different Set have to be recreated too.