Hi,
I'm having problems using Xpadder with the MadCatz Arcade fight stick.
On the controller set up page shows that my buttons 9(LT) & 10(RT) are working.
But on the profiles when i depress the buttons, they do not light up.
Can anybody help?
MadCatz Arcade Fight Stick
-
- Xpadder Xpert
- Posts: 312
- Joined: 27 Aug 2009, 15:44
- Contact:
Re: MadCatz Arcade Fight Stick
We've had a similar problem crop up for another player, using a Hori Fightstick. Try disabling XInput in Xpadder, and it should fit it right up.
While Xpadder is running, click the "Wrench" at the upper right, next to the "?" Help button.
The "Xpadder Settings" dialog window should appear.
Under "Running" look for "Use XInput (if installed), and if it's checked, uncheck it.
That should help you out. I had the same problem with my SFIV Fightpad.
While Xpadder is running, click the "Wrench" at the upper right, next to the "?" Help button.
The "Xpadder Settings" dialog window should appear.
Under "Running" look for "Use XInput (if installed), and if it's checked, uncheck it.
That should help you out. I had the same problem with my SFIV Fightpad.