How would you hold a arrow button down to move forward and hit, for example keys 9, 8 and 7.
arrow 9 8 7
will just move you forward a little and then do 9, 8 and 7. While I want the arrow to be held down until 7 is reached.
I hope this is kinda clear
How would I go about doing this?
How would you...
Re: How would you...
I don't think this is currently possible if you want to use a sequence. You can however of course do this manually.
Re: How would you...
This is not possible at the moment but it would be possible if I allowed sequence pauses of 0.00s.
I'll see if I can add it during the tweak stage of v5.7.
I'll see if I can add it during the tweak stage of v5.7.
Re: How would you...
I was looking in the software for something like this
up arrow (down press)
9 (down press & up press)
8 (down press & up press)
7 (down press & up press)
up arrow (up press)
That would do it. Down press being the action of you pressing the key down. Up press being the action of you releasing the key.
Down press and up press might not be the best way to describe it but I hope you get the idea
up arrow (down press)
9 (down press & up press)
8 (down press & up press)
7 (down press & up press)
up arrow (up press)
That would do it. Down press being the action of you pressing the key down. Up press being the action of you releasing the key.
Down press and up press might not be the best way to describe it but I hope you get the idea
Re: How would you...
The only way to do it at the moment would be to map the down arrow to a trigger on your controller and map the sequence of tapping 9, then 8 and then 7 to a button. You would need to hold the trigger, tap the button and then release the trigger when the sequence is done.
Paste this profile into Xpadder to see what I mean:
This would mean you'd have to hold the trigger down though.
To do this automatically you would need to do something like this:
Pasting this profile in v5.5 or v5.6 beta will not work but it hopefully will in v5.7
Paste this profile into Xpadder to see what I mean:
Code: Select all
;--- Xpadder Profile Data ---
Version=5.5
Name=(Untitled profile)
Set1Button1Slots=9,PAUSE 0.10s,8,PAUSE 0.10s,7
Set1TriggerLeftSlots=Arrow Down
To do this automatically you would need to do something like this:
Code: Select all
;--- Xpadder Profile Data ---
Version=5.7
Name=(Untitled profile)
Set1Button1Slots=Arrow Down,PAUSE 0.00s,Arrow Down,9,PAUSE 0.00s,8,Arrow Down,PAUSE 0.00s,7,Arrow Down,PAUSE 0.00s,Arrow Down