hi all
i would like to configure my 360 controller to play lord of the rings online with it...and for that i would like to have different sets, that can be toggled via one button
the idea is following: i have 3 button sets for 3 different situations (e.g exploring, combat, support/buffing)
and i would like to use one of the shoulder buttons to toggle the sets (with toggle, i mean that the set is switched...so that i do not to keep pressing the shoulder button - hope toggle is the correct term for this )
have i understood it right, that i can assign the shoulder button with a "two way toggle" in means of "press once, set two, press twice, set one again"?
and is it possible to assign one button for 3 sets? so starting with set 1 active - press once -> set 2 -> press twice -> set 3 -> press third time -> set one again
or is there any other way to get a similar effect?
many thanks in advance and sorry if my english might be misleading or difficult to understand (i'm austrian, if that counts for an excuse )
cheers=)
one button to switch through 3 different sets?
-
- Xpadder Xpert
- Posts: 1118
- Joined: 27 Aug 2009, 03:35
- Location: Minnesota, USA
- Contact:
Re: one button to switch through 3 different sets?
You can do this with one way set selection. Right click the shoulder button and choose : "Set selector>Selects set two>One way". Then go to set two and repeat using set three. In set three repeat using set one.
Re: one button to switch through 3 different sets?
oh my god, that's so easy that i should have come up with that idea myself xD
many thanks, sometimes you don't see the most obvious things
and is it somehow possible, if the right trigger is assigned as right mouse button, that pressing it slightly is a click and pushing it down is a toggle?
cheers=)
many thanks, sometimes you don't see the most obvious things
and is it somehow possible, if the right trigger is assigned as right mouse button, that pressing it slightly is a click and pushing it down is a toggle?
cheers=)
-
- Xpadder Xpert
- Posts: 1118
- Joined: 27 Aug 2009, 03:35
- Location: Minnesota, USA
- Contact:
Re: one button to switch through 3 different sets?
That would require toggle to be an advanced assignment slot which currently isn't possible.