A feature request (with search i didn't find anything): actually set selectors and turbo can be set once on a button. That is: a button is mapped with turbo of 0.15s and/or with a set selector.
But if i want different turbo modes? For example, on a trigger. If i move the trigger between 1% and 40% i want a turbo mode (slow), between 41% and 75% another tubo mode (normal), and more than 75% another one turbo mode (fast).
The same for set selector. Esample 3 cycles: i push the button and i select the set 2; push again and i select the set 3; etc... Not only a two-way/one-way/while held modes (that, anyway, are wonderful).
So why not do xpadder include these options as "keys" in key assigment? It can be more powerful!
[feature request]set selectors and turbo in key assignments
-
- Xpadder Xpert
- Posts: 2437
- Joined: 09 Feb 2010, 16:41
- Location: Germany
- Contact:
Re: [feature request]set selectors and turbo in key assignments
pier4r wrote: But if i want different turbo modes? For example, on a trigger. If i move the trigger between 1% and 40% i want a turbo mode (slow), between 41% and 75% another tubo mode (normal), and more than 75% another one turbo mode (fast).
Code: Select all
;--- Xpadder Profile Data ---
DataType=Profile
Version=2012.12.31
Set1TriggerLeftSlots=A,DISTANCE ZONE 40%,A,DISTANCE ZONE 35%,A,CYCLE STOP,PAUSE 0.01s,DISTANCE ZONE 40%,PAUSE 0.01s,DISTANCE ZONE 35%,B,CYCLE STOP,PAUSE 0.01s,DISTANCE ZONE 40%,C,DISTANCE ZONE 35%,C,CYCLE STOP,PAUSE 0.01s,DISTANCE ZONE 40%,PAUSE 0.01s,DISTANCE ZONE 35%,D
Set1TriggerLeftTurbo=1
How about one-way set selectors in every set.pier4r wrote:The same for set selector. Esample 3 cycles: i push the button and i select the set 2; push again and i select the set 3; etc... Not only a two-way/one-way/while held modes (that, anyway, are wonderful).
Code: Select all
;--- Xpadder Profile Data ---
DataType=Profile
Set1Button1SetSelect=1
Set2Button1SetSelect=2
Set3Button1SetSelect=3
Set4Button1SetSelect=0
Re: [feature request]set selectors and turbo in key assignments
Nice solutions, i'll try them! Thanks!
PS: about one-way set selector, i was confused on its functionality, thanks again!
PS: about one-way set selector, i was confused on its functionality, thanks again!
Re: [feature request]set selectors and turbo in key assignments
Update request (so i was not completely confused then):
if i set a one-way selector from set1 to set2 on button A, then i set one way selectors either from set2 to set1 and from set3 to set1 on the same button A; i can't use the same button from set2 and set3, unless from one set i use a selector of the tipe "while-held". Why?
These are different set, i should be able to change from one set to another even if, on different sets, i use the same button.
if i set a one-way selector from set1 to set2 on button A, then i set one way selectors either from set2 to set1 and from set3 to set1 on the same button A; i can't use the same button from set2 and set3, unless from one set i use a selector of the tipe "while-held". Why?
These are different set, i should be able to change from one set to another even if, on different sets, i use the same button.