como hacer para poner 5 joypads

Post Reply
rsantana
Posts: 6
Joined: 03 Oct 2011, 23:05
Contact:

como hacer para poner 5 joypads

Post by rsantana »

Estoy utilizando 5 joypads para una aplicacion que tengo, pero puedo configurar 4 con sus respectivas teclas y
me guarda bien los profiles, pero al querer poner el 5, ya no me guarda la configuracion. Que tengo que hacer
para que me guarde los 5 profiles de los 5 joypads.

Saludos y Gracias por la atencion.

Rodolfo

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: como hacer para poner 5 joypads

Post by Primal Fear »

Randolfo wrote:I'm using 5 joypads for an application that I have, but I can configure 4 with their respective keys
Although the profiles saved me, but to want to put on 5, I did not save the configuration. I have to do
to save me the 5 profiles of the 5 joypads.

Greetings and thanks for the attention.

Rodolfo
Translated with Google Translator

Xpadder puede trabajar con hasta 16 controladores, por lo que 5 debería haber ningún problema en absoluto. Lo que los controladores tienen?
Además, la versión de Xpadder se utilizan? Usted puede ver el número de versión, haga clic en el botón de signo de interrogación en la esquina superior derecha de la ventana principal.
Translated with Google Translator
I wrote:Xpadder can work with up to 16 controllers, so 5 should be no problem at all. What controllers do you have?
Also, which version of Xpadder do you use? You can see the version number, by clicking on the question mark button in the upper right edge of the main window.

rsantana
Posts: 6
Joined: 03 Oct 2011, 23:05
Contact:

Re: como hacer para poner 5 joypads

Post by rsantana »

la version que tengo es 2012.01.19
y si puedo ver los 5 controles al mismo tiempo. Lo que no puedo hacer
es dejar ya los profiles definidos con las teclas de cada control. Solo
lo guarda cuando son 4 controles al poner el numero 5, no lee ningun profile
de ningun control.

Saludos y gracias por la atencion

Jonathan
Xpadder creator
Posts: 1737
Joined: 24 Aug 2009, 11:33
Location: England
Contact:

Re: como hacer para poner 5 joypads

Post by Jonathan »

Google Translator wrote:a version I have is 2012.01.19
and if I can see the 5 controls at once. What I can not do
is defined profiles and leave keys with each control. single
saves when 4 controls by putting the number 5, does not read any profile
of any control.
Are all 5 joysticks identical button positions?
Google Translator wrote:¿Son todos los 5 palancas de mando idénticos?

rsantana
Posts: 6
Joined: 03 Oct 2011, 23:05
Contact:

Re: como hacer para poner 5 joypads

Post by rsantana »

si los 5 son identicos joypads acteck modelo AGJ-3200RF
cuando se ponen 4 guarda bien la configuracion y lee los profiles ok.
pero cuando son 5 no lee los profiles.

Saludos y Gracias

Jonathan
Xpadder creator
Posts: 1737
Joined: 24 Aug 2009, 11:33
Location: England
Contact:

Re: como hacer para poner 5 joypads

Post by Jonathan »

The list of Recent profiles contains 4 profiles.
To start with more than 4 you will need to use the command line or use AutoProfiles

rsantana
Posts: 6
Joined: 03 Oct 2011, 23:05
Contact:

Re: como hacer para poner 5 joypads

Post by rsantana »

can you tell me how to do that.
regards

Post Reply

Return to “Español”