Button Hold questions

Post Reply
edju86

Button Hold questions

Post by edju86 »

Okay first off. If I want to hold down my left trigger(scope) and shoot(right trigger) while it's held down, how do I set the left trigger in order to shoot while it's held down. Currently it will revert back to the no scope screen in first person when I try to shoot while the scope(left trigger) is held down. Second, If I want to make a button that is normally held down(crouch) into a tapped button where it will stay held down so I can release and tap it again to stand up, what do I do? Imagine I've never touched a computer before... Please explain this step by step, because all the other explanations suck. Thanks! :D

Mobeeuz
Xpadder Xpert
Posts: 238
Joined: 19 Feb 2010, 21:37
Contact:

Re: Button Hold questions

Post by Mobeeuz »

Sounds like XInput is not checked. Click the wrench icon top right beside the help question mark, under Running be sure Use Xinput is checked. To create the tap to hold idea, you need to select the key you want to use, click Advanced in the lower right hand side, choose toggle and check the box.

Post Reply

Return to “More questions”