[Important]To make this profile working properly, open the text file under this link, press Ctrl+A followed CTRL+C to copy all the text, open your "SplinterCellUser.ini" under ".../Tom Clancy's Splinter Cell/SYSTEM" with notepad and then replace the part "[Engine.Input]" by deleting the original part and pasting my text on this place by pressing CTRL+V[Important]
It makes the triggers not working (originally look left/right) and also disables the rest of the native controller support, except for the left stick.
The profile,
-if a assignment has two names separated by a /, then it mens that the first one is assigned on tap and the second one on hold
-QuickLoad has a delay of 0.70 seconds, so you have to hold it while you have to tap QuickLoad
Code: Select all
;--- Xpadder Profile Data ---
DataType=Profile
Version=2014.01.01
Name=Splinter Cell (X360)
Set1DPadMode=Horizontal
Set1Button1Name=Jump
Set1Button1Slots=Backspace
Set1Button2Name=Back to wall
Set1Button2Slots=Q
Set1Button3Name=Interact
Set1Button3Slots=Space
Set1Button4Name=Night/Heat Vision
Set1Button4Slots=RELEASE ZONE 0.01s,2,RELEASE ZONE 0.30s,HOLD ZONE 0.30s,3
Set1Button5Name=Quick Inventory
Set1Button5Slots=Left Control
Set1Button6Name=Reload/Equip
Set1Button6Slots=RELEASE ZONE 0.01s,R,RELEASE ZONE 0.30s,HOLD ZONE 0.30s,Middle Mouse Button (3)
Set1Button8Name=Pause
Set1Button8Slots=Escape
Set1Button9Name=Crouch
Set1Button9Slots=C
Set1Button10Name=reset cam, l. click
Set1Button10Slots=X,Left Mouse Button (1)
Set1DPadRightName=QuickSave
Set1DPadRightSlots=RELEASE ZONE 0.01s,F5,RELEASE ZONE 0.30s
Set1DPadLeftName=QuickLoad
Set1DPadLeftSlots=HOLD ZONE 0.70s,F8
Set1Stick1UpName=move
Set1Stick1UpSlots=DISTANCE ZONE 85%,W
Set1Stick1RightName=move
Set1Stick1DownName=move
Set1Stick1DownSlots=DISTANCE ZONE 85%,S
Set1Stick1LeftName=move
Set1Stick2UpName=camera
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=32
Set1Stick2RightName=camera
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=32
Set1Stick2DownName=camera
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=32
Set1Stick2LeftName=camera
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=32
Set1TriggerLeftName=Alt. Fire
Set1TriggerLeftSlots=Right Mouse Button (2)
Set1TriggerRightName=Fire, l. click
Set1TriggerRightSlots=F,Left Mouse Button (1)