Is it possible to have a key action if a stick is being moved, but not to the extreme? I could make the move stick automatically "walk" instead of "run" if the stick was only moved halfway out.
Code: Select all
;--- Xpadder Profile Data ---
DataType=Profile
Version=2011.06.24
Name=avp2
Set1Button1Name=Jump/Leap (hold)
Set1Button1Slots=RELEASE ZONE 0.01s,Space,HOLD ZONE 0.50s,Left Shift,Space,PAUSE 0.51s,RELEASE ZONE 0.51s
Set1Button2Name=Lamp/Heal/Walk
Set1Button2Slots=G
Set1Button3Name=Use/Pounce/Cloak (hold)
Set1Button3Slots=RELEASE ZONE 0.01s,E,HOLD ZONE 0.50s,C,PAUSE 0.51s,RELEASE ZONE 0.51s
Set1Button4Name=Flare/GetDisc
Set1Button4Slots=F
Set1Button5Name=Previous/Last (hold)
Set1Button5Slots=RELEASE ZONE 0.01s,Z,HOLD ZONE 0.51s,X,RELEASE ZONE 0.51s
Set1Button6Name=Next/Reload (hold)
Set1Button6Slots=RELEASE ZONE 0.01s,Q,HOLD ZONE 0.51s,R,RELEASE ZONE 0.51s
Set1Button7Name=Objectives
Set1Button7Slots=Tab
Set1Button8Slots=Escape
Set1Button9Name=Crouch/Walk (hold down)
Set1Button9Slots=RELEASE ZONE 0.01s,Forward-Slash,HOLD ZONE 0.50s,M,PAUSE 0.51s,RELEASE ZONE 0.51s
Set1Button10Name=Vision
Set1Button10Slots=RELEASE ZONE 0.01s,V,HOLD ZONE 0.50s,B,PAUSE 0.51s,RELEASE ZONE 0.51s
Set1DPadUpName=Zoom In
Set1DPadUpSlots=Page Up
Set1DPadRightName=Hack/Emit
Set1DPadRightSlots=H
Set1DPadDownName=Zoom Out
Set1DPadDownSlots=Page Down
Set1DPadLeftName=Torch/Sift
Set1DPadLeftSlots=T
Set1Stick1UpSlots=W
Set1Stick1RightSlots=D
Set1Stick1DownSlots=S
Set1Stick1LeftSlots=A
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=86
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=86
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=86
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=86
Set1TriggerLeftSlots=Right Mouse Button (2)
Set1TriggerRightSlots=Left Mouse Button (1)