Prey (X360)

Share and discuss profiles
Post Reply
Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Prey (X360)

Post by Primal Fear »

Image
If a button has two names, separated by a /, then the first one is assigned on tap and the second one on hold.
You can hold the DPad in any direction to select the Launcher, not only up.
Use on X is for different things listed below, basically it performs one left click if tapped and holds the right mouse button if held.
  • Tap: activate switch/ key panel, enter shuttle (but also fires one shot if nothing to use is in focus)
    Hold: leave shuttle, suck with auto cannon, leave aimmode if stuck (but can also enters it)

While holding the left trigger, the mouse movement on the left stick slows down for easier aiming. That may also be useful for key panels.
While holding the right stick button, it increases to turn around faster.
Quick Load on Back has some extra delay, you have to hold the button for at least 0.70 seconds to trigger this assignment.
You will get stuck while aiming with the rifle if you are running out of ammo. As the ammo fills back up automatically for a little bit, this will occur pretty often. Simply hold X, when this occurs.

Code: Select all

;--- Xpadder Profile Data ---
DataType=Profile
Version=2012.01.19
Name=Prey (X360)
Set1Name=Main
Set1StickDiagonalSizes=45,75
Set1DPadMode=FourWay
Set2Name=Aim
Set2StickDiagonalSizes=45,75
Set3Name=turn
Set1Button1Name=Jump
Set1Button1Slots=Space
Set1Button2Name=Throw Grenade
Set1Button2Slots=G
Set1Button3Name=Use (also shoots)
Set1Button3Slots=RELEASE ZONE 0.01s,Left Mouse Button (1),RELEASE ZONE 0.30s,HOLD ZONE 0.30s,Right Mouse Button (2)
Set1Button4Name=Spirit Walk
Set1Button4Slots=E
Set1Button5Name=Toggle Lighter
Set1Button5Slots=F
Set1Button6Name=Wrench
Set1Button6Slots=1
Set1Button7Name=Quick Save/Load
Set1Button7Slots=RELEASE ZONE 0.01s,F5,RELEASE ZONE 0.30s,HOLD ZONE 0.70s,F9
Set1Button8Name=Menu
Set1Button8Slots=Escape
Set1Button9Name=Crouch
Set1Button9Slots=C
Set1Button10Name=...
Set1Button10Toggle=1
Set1Button10Turbo=1
Set1Button10TurboRate=2
Set1Button10SetSelect=2
Set1DPadUpName=Rifle/Launcher
Set1DPadUpSlots=RELEASE ZONE 0.01s,2,RELEASE ZONE 0.30s,HOLD ZONE 0.30s,7
Set1DPadRightName=Leech Gun
Set1DPadRightSlots=RELEASE ZONE 0.01s,4,RELEASE ZONE 0.30s,HOLD ZONE 0.30s,7
Set1DPadDownName=Acid Sprayer
Set1DPadDownSlots=RELEASE ZONE 0.01s,6,RELEASE ZONE 0.30s,HOLD ZONE 0.30s,7
Set1DPadLeftName=Auto Cannon
Set1DPadLeftSlots=RELEASE ZONE 0.01s,5,RELEASE ZONE 0.30s,HOLD ZONE 0.30s,7
Set1Stick1UpName=Move
Set1Stick1UpSlots=W
Set1Stick1RightName=Move
Set1Stick1RightSlots=D
Set1Stick1DownName=Move
Set1Stick1DownSlots=S
Set1Stick1LeftName=Move
Set1Stick1LeftSlots=A
Set1Stick2UpName=Look
Set1Stick2UpSlots=Mouse Move Up
Set1Stick2UpMouseSpeed=53
Set1Stick2RightName=Look
Set1Stick2RightSlots=Mouse Move Right
Set1Stick2RightMouseSpeed=100
Set1Stick2DownName=Look
Set1Stick2DownSlots=Mouse Move Down
Set1Stick2DownMouseSpeed=53
Set1Stick2LeftName=Look
Set1Stick2LeftSlots=Mouse Move Left
Set1Stick2LeftMouseSpeed=100
Set1TriggerLeftName=Zoom
Set1TriggerLeftToggle=1
Set1TriggerLeftTurbo=1
Set1TriggerLeftTurboRate=2
Set1TriggerLeftSetSelect=1
Set1TriggerRightName=Attack
Set1TriggerRightSlots=Left Mouse Button (1)
Set2Button1Name=Zoom Out
Set2Button1Slots=Mouse Wheel Down
Set2Button2Name=Zoom In
Set2Button2Slots=Mouse Wheel Up
Set2Button9Name=Crouch
Set2Button9Slots=C
Set2DPadUpName=Zoom In
Set2DPadUpSlots=Mouse Wheel Up
Set2DPadDownName=Zoom Out
Set2DPadDownSlots=Mouse Wheel Down
Set2Stick1UpName=Move
Set2Stick1UpSlots=W
Set2Stick1RightName=Move
Set2Stick1RightSlots=D
Set2Stick1DownName=Move
Set2Stick1DownSlots=S
Set2Stick1LeftName=Move
Set2Stick1LeftSlots=A
Set2Stick2UpSlots=Mouse Move Up
Set2Stick2UpMouseSpeed=23
Set2Stick2RightSlots=Mouse Move Right
Set2Stick2RightMouseSpeed=60
Set2Stick2DownSlots=Mouse Move Down
Set2Stick2DownMouseSpeed=23
Set2Stick2LeftSlots=Mouse Move Left
Set2Stick2LeftMouseSpeed=60
Set2TriggerLeftSlots=Right Mouse Button (2),TAP TIME 0.04s,RELEASE ZONE 0.01s,PAUSE 0.50s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.45s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.40s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.35s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.30s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.25s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.20s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.15s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.10s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.05s,Right Mouse Button (2),RELEASE ZONE 0.05s,PAUSE 0.02s,Right Mouse Button (2)
Set2TriggerLeftToggle=1
Set2TriggerLeftSetSelect=0
Set2TriggerRightName=Shoot
Set2TriggerRightSlots=Left Mouse Button (1)
Set3Button9Name=Crouch
Set3Button9Slots=C
Set3Button10Toggle=1
Set3Button10SetSelect=0
Set3Stick1UpName=Move
Set3Stick1UpSlots=W
Set3Stick1RightName=Move
Set3Stick1RightSlots=D
Set3Stick1DownName=Move
Set3Stick1DownSlots=S
Set3Stick1LeftName=Move
Set3Stick1LeftSlots=A
Set3Stick2UpName=look up fast
Set3Stick2UpSlots=Mouse Move Up
Set3Stick2UpMouseSpeed=110
Set3Stick2RightName=turn fast
Set3Stick2RightSlots=Mouse Move Right
Set3Stick2RightMouseSpeed=255
Set3Stick2DownName=look down fast
Set3Stick2DownSlots=Mouse Move Down
Set3Stick2DownMouseSpeed=110
Set3Stick2LeftName=turn fast 
Set3Stick2LeftSlots=Mouse Move Left
Set3Stick2LeftMouseSpeed=255
Set3TriggerRightName=Attack
Set3TriggerRightSlots=Left Mouse Button (1)

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: [New] Prey (X360)

Post by Primal Fear »

Update:
1.changed the function on X to tap and hold, as it caused otherwise problems with entering a shuttle and with the Rifle
2.improved the anti toggle one the left trigger a little bit, as it could get stuck when the trigger was released after somewhere around 0.50 seconds.

Details are underlined in the original post.

Post Reply

Return to “Game Profiles”