Xbox (A_Mirror_Darkly series)
Xbox (A_Mirror_Darkly series)
EDIT: New Version fixed Graphic error, corrected triggers and shoulder button appearance.
Last edited by Oke_Doke on 12 Feb 2011, 19:39, edited 4 times in total.
Re: Xbox (A_Mirror_Darkly series)
Polite notice: please refrain from adding this sort of content to the forum. It's just... too... awesome...
-
- Posts: 14
- Joined: 20 Nov 2010, 04:20
- Location: Ilioupolis, Greece
- Contact:
Re: Xbox (A_Mirror_Darkly series)
This is so awesome! You are now my hero sir!
Re: Xbox (A_Mirror_Darkly series)
This may be a rudimentary question, but how do I get the button alignment to match up with image posted by Oke_Doke?
Currently the only button alignment I have is the one with the 10 buttons in the middle of the screen, the two trigger buttons on the left and right corners respectively, and the sticks and d-pad on the bottom of the screen.
Currently the only button alignment I have is the one with the 10 buttons in the middle of the screen, the two trigger buttons on the left and right corners respectively, and the sticks and d-pad on the bottom of the screen.
-
- Xpadder Xpert
- Posts: 1118
- Joined: 27 Aug 2009, 03:35
- Location: Minnesota, USA
- Contact:
Re: Xbox (A_Mirror_Darkly series)
You drag the various elements in the Controller settings window.
Re: Xbox (A_Mirror_Darkly series)
Oh wow, this is, indeed, too awesome
Re: Xbox (A_Mirror_Darkly series)
This is absolutely awesome!
-
- Posts: 2
- Joined: 01 Feb 2011, 10:10
Re: Xbox (A_Mirror_Darkly series)
Sorry if this is a dumb question, and ultimately, it doesn't matter because it works either way... but for the sake of curiosity, which images are for the bumpers and which are for the triggers on the "mirror darkly" layout? Of the four buttons at the top, are the WIDE ones for the bumpers or the triggers?
BTW, I too think this is awesome =)
BTW, I too think this is awesome =)
Re: Xbox (A_Mirror_Darkly series)
I'll let Oke confirm but I've always thought the square buttons are the bumpers and the wide buttons are the triggers (the bumpers register as buttons in Xpadder which is why they are the same size as the face buttons?)
Oke, would it be possible to rotate the triggers so they are vertical as the real triggers are? (oh, idea! - heads to suggestions forum)
Oke, would it be possible to rotate the triggers so they are vertical as the real triggers are? (oh, idea! - heads to suggestions forum)
-
- Xpadder Xpert
- Posts: 312
- Joined: 27 Aug 2009, 15:44
- Contact:
Re: Xbox (A_Mirror_Darkly series)
The wide buttons are the triggers, and the smaller ones are the LB/RB buttons. There is the most faint of lines showing where each button "comes from" as far as the controller.
-
- Xpadder Xpert
- Posts: 1118
- Joined: 27 Aug 2009, 03:35
- Location: Minnesota, USA
- Contact:
Re: Xbox (A_Mirror_Darkly series)
I feel the long ones might be the bumpers since they extend towards the outbound of the triggers and if you tilt the controller enough to see the triggers they would appear shorter.
-
- Posts: 2
- Joined: 01 Feb 2011, 10:10
Re: Xbox (A_Mirror_Darkly series)
RIght, i think it would help if the triggers were turned vertical as well.... would just make more sense =)
Re: Xbox (A_Mirror_Darkly series)
Wow, thanks for the praise I should really check in more often.
I must have been thinking of ps2 triggers when i made this... Oh well, the graphic flaw on the controller has been bugging me for a while so, now that I have a few minutes, I'll flip those Triggers while i'm at it. BRB Illustratin'
EDIT: BACK and fixed.
I must have been thinking of ps2 triggers when i made this... Oh well, the graphic flaw on the controller has been bugging me for a while so, now that I have a few minutes, I'll flip those Triggers while i'm at it. BRB Illustratin'
EDIT: BACK and fixed.