How do I create a Controller Image?

Post Reply
Jonathan
Xpadder creator
Posts: 1741
Joined: 24 Aug 2009, 11:33
Location: England
Contact:

How do I create a Controller Image?

Post by Jonathan »

First check the Controller Images Forum to see if an image for your controller already exists.

If not, here's how to create one.
First of all you need a paint program - see the replies for advice on good freeware recommendations

The bottom line

Xpadder Controller Images are 512x256 BMP files
Xpadder can only open uncompressed 256/16m colour BMPs but you CAN copy and paste the contents of any format directly into the Controller Settings window (using the Image options)
Xpadder uses the colour magenta (RGB:255,0,255) for transparency

How to create

1) Download an image of your controller from the internet. Alternatively, you can take a photo of your own controller or draw it directly!

2) Resize the image so that it is 256 pixels high. If the new image is now more than 512 wide then undo that resize and resize the image again but 512 pixels wide

3) If the new image is 256 pixels high then you need to expand the canvas to 512 wide (centering the image). If the new image is 512 wide then you need to expand the canvas to 256 high (with the image at the bottom)

4) Fill any white space with the colour magenta (see above) using a tolerance value to remove any off-white pixels

5) Copy the image and paste into the Controller Settings window (using the Image options). Look at the main Xpadder to test how it looks

6) Save the image as an uncompressed BMP for personal use

7) Upload to an image hosting site and post the link given into the Controller Images Forum

Tekumi

Re: How do I create a Controller Image?

Post by Tekumi »

You said:
First of all you need a paint program (if you have a good freeware recommendation then reply to this topic with your suggestion)

I say:
GIMP! http://www.gimp.org
It is really easy to use and a way better then Paint *gg*

x79_animal
Xpadder Xpert
Posts: 91
Joined: 14 May 2010, 01:24
Contact:

Re: How do I create a Controller Image?

Post by x79_animal »

Whats gimp like compared to photoshop?

Oke_Doke
Xpadder Xpert
Posts: 327
Joined: 21 Dec 2009, 16:17
Location: jupiter
Contact:

Re: How do I create a Controller Image?

Post by Oke_Doke »

Gimp is lighter on features. But powerfull in the right hands. I made the animated forum icons in gimp. :geek:

FARSTRIDER
Xpadder Xpert
Posts: 1245
Joined: 26 Aug 2009, 23:02
Contact:

Re: How do I create a Controller Image?

Post by FARSTRIDER »

i perfer paint .net

mgowen
Posts: 1
Joined: 07 Jan 2011, 02:08

Re: How do I create a Controller Image?

Post by mgowen »

Paint.NET is the ideal one to suggest here:

- More lightweight than GIMP (smaller download, program opens faster)
- Easier to use than GIMP (bit like MS paint, most people will find it much easier)
- Every feature you need and more (definitely enough to make controller images, almost as many as GIMP)
- Free and open source (I think it only works on windows - but so does Xpadder, right?

http://www.getpaint.net/

FARSTRIDER
Xpadder Xpert
Posts: 1245
Joined: 26 Aug 2009, 23:02
Contact:

Re: How do I create a Controller Image?

Post by FARSTRIDER »

mgowen wrote:Paint.NET is the ideal one to suggest here:

- More lightweight than GIMP (smaller download, program opens faster)
- Easier to use than GIMP (bit like MS paint, most people will find it much easier)
- Every feature you need and more (definitely enough to make controller images, almost as many as GIMP)
- Free and open source (I think it only works on windows - but so does Xpadder, right?

http://www.getpaint.net/
only problem some people might have is how to install plugins

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

Jonathan wrote:4) Fill any white space with the colour magenta (see above) using a tolerance value to remove any off-white pixels
If you use Paint.net, you have to switch from "Normal Blending" (filled glass bulb) to "Override" (empty glass bulb). Otherwise you will get massive pink bleeding.
Maybe you can add this as a note, Jonathan.
FARSTRIDER wrote:
mgowen wrote:Paint.NET is the ideal one to suggest here:

- More lightweight than GIMP (smaller download, program opens faster)
- Easier to use than GIMP (bit like MS paint, most people will find it much easier)
- Every feature you need and more (definitely enough to make controller images, almost as many as GIMP)
- Free and open source (I think it only works on windows - but so does Xpadder, right?

http://www.getpaint.net/
only problem some people might have is how to install plugins
It is actually no browser plugin, it's a stand alone program.

Also I have to affirm that it's the best program to create Xpadder controller images.
  • Gimp is totally overfilled with useless functions for creating a controller image
    MS Paint doesn't have a tolerance setting, so it either fills to much or to less
    Also MS Paint has no way to adjust the selected area, after selecting an area you can only reselect it
Last edited by Jonathan on 25 May 2011, 08:34, edited 1 time in total.
Reason: Moved development comments to development topic

FARSTRIDER
Xpadder Xpert
Posts: 1245
Joined: 26 Aug 2009, 23:02
Contact:

Re: How do I create a Controller Image?

Post by FARSTRIDER »

Primal Fear wrote:
FARSTRIDER wrote:
mgowen wrote:Paint.NET is the ideal one to suggest here:

- More lightweight than GIMP (smaller download, program opens faster)
- Easier to use than GIMP (bit like MS paint, most people will find it much easier)
- Every feature you need and more (definitely enough to make controller images, almost as many as GIMP)
- Free and open source (I think it only works on windows - but so does Xpadder, right?

http://www.getpaint.net/
only problem some people might have is how to install plugins
It is actually no browser plugin, it's a stand alone program.
what i meant by that is if you want more features using the plugins that are availible on thier forum

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

Ah, these plugins. :idea:
Well, you don't need them anyways. Paint.net in is standard version has absolutely everything you could need to create a controller image.

Sly
Posts: 5
Joined: 08 Nov 2011, 00:09

Re: How do I create a Controller Image?

Post by Sly »

why do you need an image ? this is all to complicated for me I just want to use my GoPd atari....

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

The controller image is not necessary, it's just to make the user interface more visual. But you can also make your layout without a image in the background or with a drawing made directly in Xpadder.

Sly
Posts: 5
Joined: 08 Nov 2011, 00:09

Re: How do I create a Controller Image?

Post by Sly »

so can I make an atari gopad contoller do wasd contols and mouse clicks?

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

Yes. You just need to create the layout (if with or without a image) and to assign the keys.
BTW: is this your controller?
http://www.ionaudio.de/system/files/ima ... /gopad.png
I would make you a controller image with that image.

Sly
Posts: 5
Joined: 08 Nov 2011, 00:09

Re: How do I create a Controller Image?

Post by Sly »

YEAS!!! but I modded it :/ my first ever mod I snapped it in half took out the circuit of the arrow buttons and c;ear and turbo the pulled the ribbon round the back and stuck it. It looks so good (boasting much)

Sly
Posts: 5
Joined: 08 Nov 2011, 00:09

Re: How do I create a Controller Image?

Post by Sly »

OMFG I just tryed using xpadder WOW its so easy an the result is BRILLLL

Pollux
Posts: 37
Joined: 26 Aug 2009, 22:41
Location: Sesimbra, Portugal
Contact:

Re: How do I create a Controller Image?

Post by Pollux »

I can't upload a controller image file.
There's any problem with the system?

link is this http://img812.imageshack.us/img812/5312/ze540s.png

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

Well, I had once the problem that I couldn't add website addresses anymore. I ended up everytime on the main site.
Now there is the same for approving images.

Pollux
Posts: 37
Joined: 26 Aug 2009, 22:41
Location: Sesimbra, Portugal
Contact:

Re: How do I create a Controller Image?

Post by Pollux »

SOLVED!

guretzeliram
Posts: 10
Joined: 02 Dec 2012, 20:09
Contact:

Re: How do I create a Controller Image?

Post by guretzeliram »

need help i am trying to upload from the database an AFTERGLOW xbox 360 controller but it says that it is invalid controller image. i followed the copy instructions even downloaded the image and even re-size it but it is not working. main problem is that in modernwarefare 2 the right joy stick is not moving fluidly it is moving while chopping each time it turns in parts

BTW i use mozilla firefox and internet explorer 10 preview edition for windows 7 64 bit
Last edited by guretzeliram on 06 Dec 2012, 04:32, edited 2 times in total.

Pollux
Posts: 37
Joined: 26 Aug 2009, 22:41
Location: Sesimbra, Portugal
Contact:

Re: How do I create a Controller Image?

Post by Pollux »

If your problem is simillar to what I said above try to contact Jonathan.
My problem was solved by him.

Cheers

guretzeliram
Posts: 10
Joined: 02 Dec 2012, 20:09
Contact:

Re: How do I create a Controller Image?

Post by guretzeliram »

jonathan Please I need help i am trying to upload from the database an AFTERGLOW xbox 360 controller but it says that it is invalid controller image. i followed the copy instructions even downloaded the image and even re-size it but it is not working. main problem is that in modernwarefare 2 the right joy stick is not moving fluidly it is moving while chopping each time it turns in parts

BTW i use mozilla firefox and internet explorer 10 preview edition for windows 7 64 bit
Last edited by guretzeliram on 06 Dec 2012, 04:32, edited 1 time in total.

guretzeliram
Posts: 10
Joined: 02 Dec 2012, 20:09
Contact:

Re: How do I create a Controller Image?

Post by guretzeliram »

Pollux wrote:If your problem is simillar to what I said above try to contact Jonathan.
My problem was solved by him.

Cheers
thanks i am tryin but i have no access to contact any member yet

Pollux
Posts: 37
Joined: 26 Aug 2009, 22:41
Location: Sesimbra, Portugal
Contact:

Re: How do I create a Controller Image?

Post by Pollux »

Wait here.
Perhaps you don't have enough privileges yet.

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

I have created a new controller image, the old one had invalid dimensions. Correctly resizing it would make it working, but the magenta background has been made with blending so there will be a magenta edging visible in Xpadder.

And BTW: You want to "download" the image. That you have said uploading caused a little confusion for me as it is also possible to submit new controller images to the DataBase.

guretzeliram
Posts: 10
Joined: 02 Dec 2012, 20:09
Contact:

Re: How do I create a Controller Image?

Post by guretzeliram »

Primal Fear wrote:I have created a new controller image, the old one had invalid dimensions. Correctly resizing it would make it working, but the magenta background has been made with blending so there will be a magenta edging visible in Xpadder.

And BTW: You want to "download" the image. That you have said uploading caused a little confusion for me as it is also possible to submit new controller images to the DataBase.
thank you very much. yes sorry I mean downloading. Thank you very much. I added your immage in xpadder

dlfv92c
Posts: 5
Joined: 12 Feb 2011, 15:57

Re: How do I create a Controller Image?

Post by dlfv92c »

WHATS UP WHEN I HIT THE CONTROLLER DATABASE ALL I GET IS A BLANK PAGE
NO WAY TO EMAIL ANYONE ABOUT PROBLEMS A BUNCH OF FORUMS THAT ARE MOSTLY LOCKED.
WHAT THE HECK IS UP WITH THIS PLACE

Pollux
Posts: 37
Joined: 26 Aug 2009, 22:41
Location: Sesimbra, Portugal
Contact:

Re: How do I create a Controller Image?

Post by Pollux »

I was there right now via cellphone.
The "heck" is with your PC or your brain.

godsgrace73
Posts: 1
Joined: 07 Sep 2013, 22:12

Re: How do I create a Controller Image?

Post by godsgrace73 »

Paint.net is for film and theatrical special effects and costs. Gimp is a free download.

born20082008
Posts: 3
Joined: 25 Jan 2014, 16:00

Re: How do I create a Controller Image?

Post by born20082008 »

Bezprzewodowy GamePad Defender Scorpion L2 Help please do not as it is impossible to send mail please!
Last edited by Primal Fear on 26 Jan 2014, 14:56, edited 1 time in total.
Reason: removed E-Mail address

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

Do you want a controller image for this controller (means I would create it for you)?
Is this one the controller you mean?

born20082008
Posts: 3
Joined: 25 Jan 2014, 16:00

Re: How do I create a Controller Image?

Post by born20082008 »

Yes exactly this for earlier thanks

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

I have posted the controller image here. You can read here how to Copy&Paste it.

acdc_forever77
Posts: 5
Joined: 14 Sep 2012, 21:47

Re: How do I create a Controller Image?

Post by acdc_forever77 »

Is there a tutorial for Photoshop and or Gimp? I'm trying to make an image for the MK9 360 stick. (This one https://www.google.com/url?sa=i&rct=j&q ... 2350323930

Primal Fear
Xpadder Xpert
Posts: 2437
Joined: 09 Feb 2010, 16:41
Location: Germany
Contact:

Re: How do I create a Controller Image?

Post by Primal Fear »

http://xpadder.com/forum4/viewtopic.php ... 428#p21428
It looks a little bit chewed on the right side, that because all images I could find where .jpg's and .jpg breaks color transitions and tones. I made some adjustments to the worst pixels, but I see no way how to make it perfect.

acdc_forever77
Posts: 5
Joined: 14 Sep 2012, 21:47

Re: How do I create a Controller Image?

Post by acdc_forever77 »

Oh wow thanks man!! And it's cool this will work :) Good quality pics are indeed hard to come by.

itzxjosh
Posts: 6
Joined: 11 Sep 2014, 11:00

Re: How do I create a Controller Image?

Post by itzxjosh »

Primal Fear wrote:The controller image is not necessary, it's just to make the user interface more visual. But you can also make your layout without a image in the background or with a drawing made directly in Xpadder.
what he said ^ the image is just to make the layout look like your controller, I'm now using an xbox 360 air flo controller to play eso, but my image is from an air flo controller to the ps3 lol, really it's just cosmetics. If it's not a concern to you. You can just skip the image phase of the controller setup an go directly to sticks, then buttons, etc... just name your buttons after you place them in the program an it shouldn't be any different, the functionality stays the same.

geraldfogg
Posts: 16
Joined: 25 Sep 2014, 21:55

Re: How do I create a Controller Image?

Post by geraldfogg »

:lol:
mgowen wrote:Paint.NET is the ideal one to suggest here:

- More lightweight than GIMP (smaller download, program opens faster)
- Easier to use than GIMP (bit like MS paint, most people will find it much easier)
- Every feature you need and more (definitely enough to make controller images, almost as many as GIMP)
- Free and open source (I think it only works on windows - but so does Xpadder, right?

http://www.getpaint.net/

jai.malik04
Posts: 2
Joined: 08 Nov 2014, 09:33

How Do I go to controller settings ?

Post by jai.malik04 »

I can't find controller settings please help.

greatlionofjudah
Posts: 4
Joined: 25 Jan 2015, 00:53

Re: How do I create a Controller Image?

Post by greatlionofjudah »

Would someone makeme a controller image for this the srw s1? http://steelseries.com/us/products/othe ... ring-wheel

greatlionofjudah
Posts: 4
Joined: 25 Jan 2015, 00:53

Re: How do I create a Controller Image?

Post by greatlionofjudah »

also need the 4 paddles on the rear... I think they're the bumpers and the triggers

EyeDeeNo76
Posts: 22
Joined: 04 Aug 2014, 23:13
Location: 97km north of New York City.

Re: How do I create a Controller Image?

Post by EyeDeeNo76 »

Added the 4 paddles on the rear. If the placement is no good let me know.

gbrandon
Posts: 4
Joined: 19 Jun 2014, 01:01

Re: How do I create a Controller Image?

Post by gbrandon »

Sure would be nice if someone could write a simple 5 minute tutorial on using paint.net.

I know how to resize the image
I know how to set the file format to bmp
I know how to set the RGB levels of 255,0,255

I DONT KNOW HOW TO CHANGE THE BACKGROUND TO MAGENTA

EyeDeeNo76
Posts: 22
Joined: 04 Aug 2014, 23:13
Location: 97km north of New York City.

Re: How do I create a Controller Image?

Post by EyeDeeNo76 »

gbrandon wrote:Sure would be nice if someone could write a simple 5 minute tutorial on using paint.net.

I know how to resize the image
I know how to set the file format to bmp
I know how to set the RGB levels of 255,0,255

I DONT KNOW HOW TO CHANGE THE BACKGROUND TO MAGENTA
You need to paint in the magenta. Start by erasing everything around target image than use the paint pail or bucket whatever you want to call it to fill in the most you can than the spots that don't get filled in use the brushes to get them after that to get best result I zoom all the way in and do the touch ups around the edges of target image with the pencil pixel by pixel.

paul436
Posts: 1
Joined: 14 May 2015, 02:38

Re: How do I create a Controller Image?

Post by paul436 »

godsgrace73 wrote:Paint.net is for film and theatrical special effects and costs. Gimp is a free download.
I'm not sure where you are getting that idea from, but it is incorrect. Paint.NET is a generic paint program like Gimp or MS Paint. See the features here.

And Paint.NET is free... here, try this download from their website.

Post Reply

Return to “How to download, create and share”