Bug when using selectors

Post Reply
Posts: 1
Joined: 15 Jan 2015, 20:58

Bug when using selectors

Post by MacGoose »

Didn't find any other place to report a bug so here it goes:

X-Box 360 controller for Windows. Some buttons are assigned to switch levels when held. If I press one of the buttons down, and then press a second one, then release both buttons, the level assigned to the second button are stuck. Should be easily replicated as it happens every time I try:

1. Assign level 2 when held to button A
2. Assign level 3 when held to button B
3. Hold button A
4. Hold button B
5. Release both buttons
6. Now it's stuck to level 3

Post Reply

Return to “Other questions”